百葉窗出現(xiàn)的問題與其解決辦法：
    百葉窗與框縫隙大：主要原因是安裝時刨修不準及門窗框與地面不垂直，可將百葉窗卸下刨修至與框吻合后重新安裝，如門窗框不垂直應在框板內墊片找直。 
    五金件安裝質量差：原因是平開門的合頁沒上正，導致門窗扇與框套不平整。可將每個合頁先擰下一個螺絲然后調整百葉窗與框的平整度調整修理無誤后再擰緊全部螺絲釘。如合頁螺絲短、螺絲一次釘入及傾斜都會導致門窗扇曠蕩修理時應更換合適的螺絲釘。上螺釘時須平直螺絲應先釘入全長的1／3然后擰入其余2／3嚴禁一次釘入或傾斜擰入。 
    百葉窗開關不順利：主要原因是鎖具安裝有問題應將鎖舌板卸下用鑿子修理舌槽，調整門框鎖舌口位置后再安裝上鎖舌板。 
    推拉門窗滑動時擰勁：主要原因是上、下軌道或軌槽的中心線未在同一鉛垂面內所致，應通過調整軌道位置，使上、下軌道或軌槽的中心線鉛垂對準。
    以上是我公司多年以來根據(jù)廣大用戶的使用情況，給您提供一些基本注意事項。如您遇到什么樣的技術難題，歡迎來電咨詢。 

The shutters problems and its solution:

Shutters and gap big box: the main reason is that when installation shaved no door window frame is not vertical with the ground, the blinds can be unloaded shaved to reinstall after agreement with box, such as the door window frame not find straight vertical should be within the frame plate gasket.

Hardware installation quality is poor: why is flat door hinges not on, led to the doors and Windows set of fan and casing is not smooth. 可將每個合頁先擰下一個螺絲然后調整百葉窗與框的平整度調整修理無誤后再擰緊全部螺絲釘。 Such as short hinge screws, screw a screw into the and inclined can all result in a door to door repair universal suitable screws should be changed. 上螺釘時須平直螺絲應先釘入全長的1／3然后擰入其余2／3嚴禁一次釘入或傾斜擰入。

Shutter switch is not smooth, the main reason is that there is something wrong with the lock installed lock tongue plate should be unload groove with a chisel repair tongue, adjust the door lock tongue mouth location before you install the lock tongue plate.

Sliding door window sliding NingJin: the main reason is that upper and lower orbit or the center line of the rail slot is not in the same vertical surface, should by adjusting the position of the track, the upper and lower orbit or rail groove center line of the vertical alignment.

The above is my company over the years according to the usage of the masses of users, provide you with some basic considerations. If you encounter what kind of technical problems, welcome to inquire.